SKU: 86229112829
ebow pedal

ebow pedal EBow Plus Hand-Held Sustainer for Guitar – Strait Music

Sale price$24.64 Regular price$27.38
Save 10%

Pay in installments of $6.84 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 22 - Jul 27

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

ebow pedal EBow Plus Hand-Held Sustainer for Guitar – Strait MusicThe Electronic Bow for Guitar! The EBow is a hand held electronic bow for guitar. This small battery powered unit replaces the pick in the right hand letting the guitarist mimic strings, horns, and woodwinds with unbelievable sensitivity. The EBow produces a powerful infinite sustain, rich in harmonics for incredible guitar sounds. Unlike plug in effects, the Energy Bow does its work on the string itself Direct String Synthesis. Infinite Sustain is

The Electronic Bow for Guitar!

The EBow is a hand-held electronic bow for guitar. This small battery-powered unit replaces the pick in the right hand letting the guitarist mimic strings, horns, and woodwinds with unbelievable sensitivity. The EBow produces a powerful infinite sustain, rich in harmonics for incredible guitar sounds. Unlike plug-in effects, the Energy Bow does its work on the string itself... Direct String Synthesis™. Infinite Sustain is just the beginning.

 

 


The wide range of tones and textures come from technique not presets. Where it is positioned along the strings, how it is moved, whether it is tilted to one side or up on one end, how quickly it is slapped into place all contribute to the sound. One key variable is its interplay with your pickup. The closer you bring the EBow to a magnetic pickup that is on, the louder and brighter the sound. This only happens very close to the pickup. This is called the playing area. You can vibrate the string anywhere along its length from the nut to the bridge, but the dramatic volume change occurs only very near a pickup that is on. Staying in this small playing area gives you lots of control over the tone and volume dynamics.

The EBow rides on two strings, straddling the one you're playing which is not touched by the EBow. Push the EBow against these support strings and the drive channel comes closer to the string that you're bowing intensifying the drive field for more string vibration. Less pressure or tilting the EBow away from the string decreases this drive.

Don't be afraid of the EBow. Slide it along the strings, tilt it, slap it into place over the pickup and see what happens. Try it over all your pickups to hear the difference in tone. When you hear something you like, try to repeat it. Then master it as a technique.


What does the "E" stand for?
For the years preceding the EBow's debut in 1976, it was called the "Energy Bow" because it bowed the guitar string with an energy field. Around the shop, we began referring to it as the "E" bow for short. Fewer syllables, less of an effort.

Will the EBow play more than one string at time?
No. But neither does a pick. One of the coolest effects is the EBow arpeggio.

Does the EBow work on bass?
The EBow was designed for guitar string spacing. It gets its necessary alignment by resting on the strings adjacent to the one you're playing. To play the EBow on bass, you must accomplish this critical alignment in challenging ways. You can rest the EBow between the strings and tilt it sideways to get the string you want to play to run down the drive channel. You can use your forefinger and thumb off the edges of the EBow to create "grooves" that catch the adjacent strings. Or, you can just hold the EBow in the proper position through sheer will and determination. Light gauge strings and a touch of distortion can prove useful, especially in the harmonic mode.

Will the EBow work on Acoustic?
If you have a magnetic pickup in the sound hole, the EBow should respond as it would on a solid body electric, though the strings tend to decay more quickly and activate more slowly. Acoustics with bridge transducers, piezo pickups or microphones will be much quieter and, of course, there is no HotSpot, which is necessary for bowing strokes and spiccato. However, you can get a very clean, natural sounding string tone. When moving from string-to-string on an acoustic without a magnetic pickup in the sound hole, you should mute the SupportStrings to reduce the noise of the EBow on the strings.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 86229112829

Discover Niche Categories That Outsell ebow pedal

Top-Converting Item to Boost Your Average Order

4.2 ★★★★★
Based on 21 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
J
Verified Purchase
jc
Waukegan, US
★★★★★ 4
The basic set-up is relatively easy which was a big plus for me......
First let me start off by saying that I am not an audiophile. So, this review will not get into the weeds of the more complex settings this receiver is capable of. For example, the Dirac room measuring option. No way was I attempting to mess with that. Especially, after reading that some reviewers who actually have experience with Dirac found it could be confusing/difficult to set up. Besides I come from a previous Onkyo the TX-SR607 which had the AccuEQ Room Calibration similar to this receiver, so I used that instead with no issues. As far as hooking up the speakers it's pretty straight forward. If you have banana plugs, use them, seriously. I originally planned on using banana plugs but in order to save time I decided against that. But I wish I had taken the extra time to go with bananas because trying to thread the speaker wire into the speaker terminals is tedious, there not much room between the terminals and even me with my skinny fingers struggled a bit. Wish Onkyo designed their terminals side by side, but I think only Denon does that. Anyway, after all the speakers were connected (I'm currently using a 5.1.2 setup) and I connected my tv, Blu-ray player, CD player, etc., etc., I ran the AccuEQ Room Calibration, and I was good to go. I did change the some of the settings like speaker volume that AccuEQ has set but nothing major. I have noticed that I need to turn the volume up much higher on this Onkyo than on my previous one. What I mean by that is that on my previous Onkyo I would set the volume indicator at around 30-35 tops for movies. With this one it's more like 40-45, maybe how the volume is measured is different on this one. The sound is excellent for movies and music I have no complaints there. I have only tried a few of features so far like Airplay but will dig deeper into the manual (I downloaded from the internet) as time goes by. I will say as far as build quality is concerned it's not bad, but IMO my old Onkyo, a 2009 model, had the look and feel of a more expensive receiver. But it's what's inside that matters most so hopefully this one last as long as my previous Onkyo.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 22, 2024
J
Verified Purchase
JOKER
Port Orchard, US
★★★★★ 1
Sound unexpectantly blasted for no reason. It malfunctioned!
I spent hours between installation and set up! I had to return it. I turned on NET (network) to play Sirius Xm and the volume was low but after a few minutes the sound turned all the way up to maximum completely on its own? This happened at least two more times. I contacted ONKYO and was told it is clearly defective and that their is no solution to correct the problem, and that I should return it immediately! I purchased the newer model and am pleased with its performance! It’s unfortunate because the first one that had the issue with the sound really played nice, but having sound change its volume so suddenly to its full capacity was not what I expected, nor felt comfortable enough to keep as I said I was told to return it, which I did! My advice here would be to purchase the newer model, which seems to be much more stable in its performance, and the quality is excellent.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 29, 2025
B
Verified Purchase
Bossman
Louisville, US
★★★★★ 5
Absolutely Love This Receiver
The Onkyo TX‑NR7100 has completely transformed my home theater. The sound quality is rich, detailed, and powerful, and the 9.2‑channel setup gives movies and music a level of immersion I didn’t realize I was missing. Dirac Live right out of the box is a huge win — the room correction made an immediate, noticeable improvement. Setup was smooth, the interface is clean, and everything from streaming to switching inputs feels fast and reliable. It also plays perfectly with the rest of my system, and the THX certification really shows in how cinematic everything sounds. I absolutely love this receiver. It’s one of those upgrades that makes you wonder why you didn’t do it sooner.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 20, 2026
J
Verified Purchase
James Tepper
Lowell, US
★★★★★ 5
Incredible 9.2 Surround receiver at an unbeatable price.
I may return at a future date to give a more complete review, but others that are much more knowledgeable about audio equipment than I have already done so. For me, the Onkyo (Onkyo TX-NR7100 9.2-Channel 8K/4K Network A/V Receiver) replaced a much older (2001) TX DS787 5.1 100 W Surround receiver that listed new for around $1050. I probably didn't pay quite that much but certainly something near $900. It was great for its time, perhaps even advanced with THX, Dolby, and other listening modes. But it didn't have: HDMI inputs or outputs, any BlueTooth capability, no hard wired or WiFi connectivity or basically any operating or connection modes that most all modern receivers have. This turned into a big problem with modern LED/LCD/OLED TVs, Alexa and other now common devices. I bought my new Onkyo TX-NR7100 from Amazon for $625. Other retailers (e.g.Best Buy) advertise it for up to $1200, so Amazon's price is outstanding. Set up was far more complicated (for me) than any previous receiver that I ever owned, mostly because there were a very large number of back panel input and output jacks, to and from the TV, as well as speaker outputs for 9.2 surround. Suffice it to say that once everything was connected properly (I made a few mistakes along the way), I was completely thrilled. The On Screen Display, completely accessible either from the front panel or the remote was far superior to anything I had ever seen before. Literally every operating parameter is accessible to the user. And I used most of them. It is also completely WiFi ready so my 150 Gbit home Wifi network lets it connect wirelessly and stream music error free. BlueTooth is also another way to connect almost any device to it for audio and audio/video playback if you connect the digital connections to and from a modern TV. It also speaks and listens to Alexa, although I must confess that I haven't played around with that much yet. This is already much longer than I had intended, so let it suffice to say that the Onkyo TX-NR7100 is an absolutely incredible receiver for an incredible price. I'd give it 8 stars if I could. JM TEPPER
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 7, 2024
B
Verified Purchase
Brian M.
Los Angeles, US
★★★★★ 5
Sounds great.
Just received my Onkyo TX-NR 7100, watched a few YouTube videos before it arrived, so set up was easy. Ran accuEQ, I am getting new front speakers so I’ll wait to run Dirac. After accuEQ, I still had to make a few adjustments, to the speaker levels and especially the sub. It set my subwoofer way too low. As of right now having no problems with Bluetooth. I’ve only listened to music so far, can’t wait to watch a movie. For now I have a 5.1.2. System, getting new fronts, the Klipsch r51-m’s will go to the rear surround and Klipsch r41-m’s will be my height speakers in a 5.1.4 system. So far loving this avr. Update 2: Just calibrated with Dirac for the 6th time. They tell you if you sit in a recliner, reclined measure with it reclined. Well I measured with the chair in its upright position. It makes a huge difference I hear the surrounds much better. Btw I listen to all channel stereo, I know audiophiles say it sucks, however I listened to 2 channel stereo for 20 years, when there was nothing else. I didn’t buy a 9 channel avr to listen to 2 channel stereo. Like Randy the cheap audio man says “ audiophiles aren’t always right. If it sounds good to you, that’s all that matters.” So try calibrating in the upright position, or if you sit on a stationary chair or couch, try positioning the mic slightly forward of your listening position. It makes a huge difference. Hope this helps, enjoy. Update: Ok bought Klipsch rp-600m speakers for the front with 52c center. 51m surrounds, 41m rear heights. Polk owm3 front heights. Why Polk? Lighter easy to hang and as height speakers they are only there for atmos. Ran Dirac live, the application does what it would take several hours to make it sound like it does, if I even could get it to sound so good. Apple TV 4K with my Hisense U8K. The google tv interface is ok, but Apple TV is faster and easier. The Onkyo 7100 is a gem, runs pretty warm but I have it out in the open. If you are going to put in a cabinet I suggest a fan. Very happy with the whole system.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 11, 2025

recommand products